2MP QTN8015B-AU IP Bullet

$149 RRP

Q-See QTN8015B IP Bullet Camera : 1/2.8″ 2MP CMOS sensor : 1920X1080 : 3.6mm Lens : 10-20M IR Night Vision : H.264 : IP66

The QTN8015B is a standard issue 1080P camera ideal for basic home or indoor office use.  Plug-and-Play compatibility with Q-See NVRs and DIY IP PoE kits.

SKU: QTN8015B-AU Category:

Q-See QTN8015B IP Bullet Camera : 1/2.8″ 2MP CMOS sensor : 1920×1080 : 3.6mm Lens : 10-20M IR Night Vision : H.264 : IP66

The Q-See 2MP QTN8015B IP Bullet is a low impact high definition fixed lens camera which can be mounted at any angle including under eaves, on walls or inside.  With its short range night vision it’s ideal for filling in close gaps long range cameras struggle with.  This sleek little camera is ideal for home, commercial and small business deployments where basic HD resolution is all that is required.

In the era of 4MP, 5MP, 8MP and soon 12MP the question must be asked – why still use a 2MP IP camera?  Other than the clear financial fact (2MP is cheaper) the answer is also practical.  2MP HD cameras are ideal still for covering close in smaller areas like offices, entryways and narrow byways.  They are perfect for front door close in coverage where the field of view is recording images only a few meters from the camera or side gates.

The Q-See QTN8015B may be aggressively priced but its still has many advanced features include ICR Auto Switch, True Day / Night,3D DNR,Digital WDR and ROI coding with support for P2P, direct DC12V Power Supply or PoE and a built-in Web Server.  It will connect to any Q-See NVR, CMS or VMS.  Call us – we can explain!

 

 

 

Available online from:

https://www.mitre10.com.au/hardware-electrical/hardware/home-safety/q-see-2mp-poe-bullet-camera 
https://www.homehardware.com.au/qsee-2mp-poe-bullet-camera/ 

Expand your Q874-xxx-1-AU or QT878-xxx-1-AU DIY home CCTV kits with these advanced IP over Ethernet cable bullet cameras from Q-See Australia.  Each QTN8015B-AU comes bundles with the camera and an 18m Ethernet cable for power and video signal.  Expand your Ethernet cable up to 100 meters with ease.

 

 

 

 

 

 

 

Match the Q-See QTN8015B with the next generation Network Video Recorders form Q-See like the QT874, QT878 and QT816 for quick and easy plug and play setup.  Power for the QTN8015B-AU is supplied via the Power Over Ethernet ports on the rear of those NVRs.  A separate DC12V connector is also available if you would like to supply direct local power to the camera.

 

 

 

Specifications

Model

QTN8015B
Image Sensor 1 / 2.8 “CMOS
Image Size 1920×1080
Electronic Shutter 1 / 25 s ~ 1 / 100000 s
Iris Type Fixed Iris
Min. Illumination 0.01 lux @F1.2 / AGC ON; 0 lux with IR
Lens 3.6mm @F1.6 / horizontal field of view: 79°
Lens Mount M12
Day & Night ICR
Wide Dynamic Range Digital WDR
BLC No ( See QTN8086B if required)
HLC No ( See QTN8086B if required)
Defogging No ( See QTN8086B if required)
Digital NR 2D / 3D DNR
Angle Adjustment Any angle

Image

Video Compression H.264 BP / MP / HP; MJPEG
Resolution 1080P 2MP ( 1920×1080 ) / 720P 1.3MP ( 1280×720 ) / D1 & CIF (480×240)
Main Stream 60Hz 1080P ( 1 ~ 30fps ) / 720P ( 1 ~ 30fps )
Main Stream 50Hz 1080P ( 1 ~ 25fps ) / 720P ( 1 ~ 25fps )
Bit Rate 256 Kbps ~ 5 Mbps
Bit Rate Type VBR / CBR
Quality Five levels under VBR; Freely adjustable under CBR
Image Settings ROI / Saturation / Brightness / Chroma / Contrast / Wide Dynamic / Sharpen / NR /etc. Adjustable through client software or web browser
Audio Compression No
ROI Each ROI to be configured separately

Interfaces

Network RJ45 10M / 100M self-adaption
Audio No
Video No separate CVBS output

Functions

Remote Monitoring IE browsing /CMS remote control
IE browsing / CMS remote control Support simultaneous monitoring for up to 10 users; Support multi-stream real time transmission
Network Protocols TCP / IP / UDP / DHCP / NTP / R Network Protocol TSP / PPPoE / DDNS / SMTP / FTP
Interface Protocol ONVIF
Storage Network remote storage to other QT-View NVRs/VSSs
Smart Alarm Motion alarm
Smart Analysis No
PoE Yes
IR Distance 10 ~ 20 m
Ingress Protection IP66

Others

Power Supply DC12V / PoE
Power Consumption < 2W
IR Consumption ON < 4.5W
Operating Environment – 20 °C ~ 50 °C /10 % ~ 90 % relative humidity
Dimensions (mm) 64×183
Weight (net) 306g
Installation Wall mounting / pendent mounting

 

Call Now Button